Test :
- Free non dégroupé (ppp)
- ueagle-atm 1.0.0c + ueagle-atm-svn-2005-11-03
- opensuse 10.0
- sagem fast 800 E1
- nforce 2 chipset
Logs:
ueaglediag results (module loaded but modem not plugged) :
Diagnostic () driver ueagle-atm 20051104174236
# System Information
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)
ueagle_atm 23340 0
usbatm 13824 1 ueagle_atm
atm 37720 1 usbatm
usbhid 43616 1
firmware_class 9856 2 ueagle_atm,bttv
usbcore 112640 7 ueagle_atm,usbatm,usbhid,ehci_hcd,ohci_hcd
I can load modules usbatm, firmware_class and ueagle_atm without problem.
Nov 4 17:41:14 linux kernel: atm: module not supported by Novell, setting U taint flag.
Nov 4 17:41:14 linux kernel: usbatm: module not supported by Novell, setting U taint flag.
Nov 4 17:41:51 linux kernel: ueagle_atm: module not supported by Novell, setting U taint flag.
Nov 4 17:41:51 linux kernel: [ueagle-atm] driver ueagle-svn $Id: ueagle.c 160 2005-11-03 13:55:58Z swg $ loaded
Nov 4 17:41:51 linux kernel: usbcore: registered new driver ueagle-atm
Nov 4 17:46:50 linux init: Switching to runlevel: 3
But when I plug the modem, the kernel crash :
Nov 4 17:47:44 linux kernel: usb 1-2.3: new full speed USB device using ohci_hcd and address 7
Nov 4 17:47:44 linux kernel: usb 1-2.3: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010)
Nov 4 17:47:44 linux kernel: usb 1-2.3: reset full speed USB device using ohci_hcd and address 7
Nov 4 17:47:44 linux kernel: usb 1-2.3: [ueagle-atm] pre-firmware device, uploading firmware
Nov 4 17:47:44 linux kernel: usb 1-2.3: [ueagle-atm] loading firmware ueagle-atm/eagleI.fw
Nov 4 17:47:46 linux kernel: usb 1-2.3: [ueagle-atm] firmware uploaded
Nov 4 17:47:46 linux kernel: usb 1-2.3: USB disconnect, address 7
Nov 4 17:47:48 linux kernel: usb 1-2.3: new full speed USB device using ohci_hcd and address 8
Nov 4 17:47:48 linux kernel: usb 1-2.3: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F)
Nov 4 17:47:48 linux kernel: usb 1-2.3: reset full speed USB device using ohci_hcd and address 8
Nov 4 17:47:48 linux kernel: usb 1-2.3: [ueagle-atm] using iso mode
Nov 4 17:47:48 linux kernel: usb 1-2.3: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/001-008
Nov 4 17:47:48 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 17:47:48 linux kernel: ATM dev 0: usbatm_submit_urb: urb 0xf52c12a0 submission failed (-28)!
Nov 4 17:47:50 linux kernel: Unable to handle kernel paging request at virtual address 4ccc634e
Nov 4 17:47:50 linux kernel: printing eip:
Nov 4 17:47:50 linux kernel: f9474435
Nov 4 17:47:50 linux kernel: *pde = 00000000
Nov 4 17:47:50 linux kernel: Oops: 0000 [#1]
Nov 4 17:47:50 linux kernel: Modules linked in: ueagle_atm usbatm atm ir_kbd_i2c ir_common nls_iso8859_1 nls_cp437 sg sd_mod sbp2 ipt_MASQUERADE ipt_pkttype ipt_TCPMSS ipt_LOG ipt_limit hfsplus subfs appletalk ax25 ipx vmnet vmmon speedstep_lib freq_table eeprom w83l785ts asb100 i2c_sensor nvidia snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device button battery ac edd ip6t_REJECT ipt_REJECT ipt_state iptable_mangle usbhid iptable_nat iptable_filter ip6table_mangle tuner ip_conntrack tvaudio ip_tables msp3400 3c59x mii generic forcedeth ehci_hcd bttv video_buf firmware_class i2c_algo_bit v4l2_common btcx_risc ivtv_tveeprom videodev rt2500pci rt2x00core ieee80211 ieee80211_crypt ohci1394 ieee1394 sata_nv libata scsi_mod snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc i2c_nforce2 i2c_core shpchp pci_hotplug ohci_hcd usbcore nvidia_agp agpgart ip6table_filter ip6_tables ipv6 parport_pc lp parport nls_utf8 nls_cp850 vfat fat dm_mod reiserfs ide_cd cdrom fan thermal processor am
Nov 4 17:47:50 linux kernel: d74xx ide_disk ide_core
Nov 4 17:47:50 linux kernel: CPU: 0
Nov 4 17:47:50 linux kernel: EIP: 0060:[<f9474435>] Tainted: PF U VLI
Nov 4 17:47:50 linux kernel: EFLAGS: 00010246 (2.6.13-15-default)
Nov 4 17:47:50 linux kernel: EIP is at check_dsp+0x45/0xb0 [ueagle_atm]
Nov 4 17:47:50 linux kernel: eax: 00000000 ebx: f88020b5 ecx: c036a048 edx: 4ccc634e
Nov 4 17:47:50 linux kernel: esi: f8802005 edi: f8802000 ebp: 00000000 esp: c1907f20
Nov 4 17:47:50 linux kernel: ds: 007b es: 007b ss: 0068
Nov 4 17:47:50 linux kernel: Process events/0 (pid: 3, threadinfo=c1906000 task=dfe35020)
Nov 4 17:47:50 linux kernel: Stack: 00000012 c036a048 00000000 f5b22aa0 f9476f09 dfffb640 f94745c1 f5b20000
Nov 4 17:47:50 linux kernel: f5b22aa0 f5b20000 f9474807 17634d00 003d1446 d7179000 c1907f6c 11e1a300
Nov 4 17:47:50 linux kernel: 00000000 f5b22ad8 00000283 f5b22aa0 dfffb640 c012a529 dfffb648 dfffb650
Nov 4 17:47:50 linux kernel: Call Trace:
Nov 4 17:47:50 linux kernel: [<f94745c1>] request_dsp+0x41/0x100 [ueagle_atm]
Nov 4 17:47:50 linux kernel: [<f9474807>] uea_load_page+0x187/0x1e0 [ueagle_atm]
Nov 4 17:47:50 linux kernel: [<c012a529>] worker_thread+0x169/0x200
Nov 4 17:47:50 linux kernel: [<f9474680>] uea_load_page+0x0/0x1e0 [ueagle_atm]
Nov 4 17:47:50 linux kernel: [<c01195c7>] __wake_up_common+0x37/0x60
Nov 4 17:47:50 linux kernel: [<c0119580>] default_wake_function+0x0/0x10
Nov 4 17:47:50 linux kernel: [<c012a3c0>] worker_thread+0x0/0x200
Nov 4 17:47:50 linux kernel: [<c012db75>] kthread+0x85/0x90
Nov 4 17:47:50 linux kernel: [<c012daf0>] kthread+0x0/0x90
Nov 4 17:47:50 linux kernel: [<c01012f1>] kernel_thread_helper+0x5/0x14
Nov 4 17:47:50 linux kernel: Code: 04 86 39 c3 72 66 8b 04 24 31 ed 85 c0 7e 6f 8d b4 26 00 00 00 00 8b 06 83 c6 04 85 c0 74 59 8d 14 07 8d 42 01 39 c3 72 43 31 c0 <8a> 02 89 44 24 04 85 c0 7e 43 8d 4a 05 39 cb 72 30 66 8b 42 03
Nov 4 17:47:52 linux kernel: <6>usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 17:47:56 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 17:47:59 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 17:48:03 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 17:48:07 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 17:48:10 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 17:48:14 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 17:48:16 linux kernel: usb 1-2.3: [UEAGLE-ATM] uea_intr() failed with -71
Nov 4 17:48:16 linux kernel: usb 1-2.3: USB disconnect, address 8
Nov 4 17:48:18 linux kernel: usb 1-2.3: [ueagle-atm] kthread finish with status -110
Version 1.0.0c patched :
Nov 4 20:21:33 linux kernel: atm: module not supported by Novell, setting U taint flag.
Nov 4 20:21:33 linux kernel: NET: Registered protocol family 8
Nov 4 20:21:33 linux kernel: NET: Registered protocol family 20
Nov 4 20:21:33 linux kernel: usbatm: module not supported by Novell, setting U taint flag.
Nov 4 20:21:33 linux kernel: ueagle_atm: module not supported by Novell, setting U taint flag.
Nov 4 20:21:33 linux kernel: [ueagle-atm] driver ueagle-svn $Id: ueagle.c 142 2005-10-29 23:17:21Z matc $ loaded
Nov 4 20:21:33 linux kernel: usbcore: registered new driver ueagle-atm
Nov 4 20:22:48 linux kernel: usb 1-2.3: new full speed USB device using ohci_hcd and address 8
Nov 4 20:22:49 linux kernel: usb 1-2.3: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010)
Nov 4 20:22:49 linux kernel: usb 1-2.3: reset full speed USB device using ohci_hcd and address 8
Nov 4 20:22:49 linux kernel: usb 1-2.3: [ueagle-atm] pre-firmware device, uploading firmware
Nov 4 20:22:51 linux kernel: usb 1-2.3: [ueagle-atm] firmware uploaded
Nov 4 20:22:51 linux kernel: usb 1-2.3: USB disconnect, address 8
Nov 4 20:22:53 linux kernel: usb 1-2.3: new full speed USB device using ohci_hcd and address 9
Nov 4 20:22:53 linux kernel: usb 1-2.3: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F)
Nov 4 20:22:53 linux kernel: usb 1-2.3: reset full speed USB device using ohci_hcd and address 9
Nov 4 20:22:53 linux kernel: usb 1-2.3: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/001-009
Nov 4 20:22:53 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 20:22:54 linux kernel: usb 1-2.3: [ueagle-atm] using dsp f8802000
Nov 4 20:22:54 linux kernel: Unable to handle kernel paging request at virtual address 4ccc634e
Nov 4 20:22:54 linux kernel: printing eip:
Nov 4 20:22:54 linux kernel: f92f23c5
Nov 4 20:22:54 linux kernel: *pde = 00000000
Nov 4 20:22:54 linux kernel: Oops: 0000 [#1]
Nov 4 20:22:54 linux kernel: Modules linked in: ueagle_atm usbatm atm joydev appletalk ax25 ipx ipt_MASQUERADE ipt_pkttype ipt_TCPMSS ipt_LOG ipt_limit hfsplus nls_iso8859_1 nls_cp437 vmnet vmmon subfs speedstep_lib freq_table eeprom w83l785ts asb100 i2c_sensor nvidia snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device button battery ac edd sg sd_mod ip6t_REJECT ipt_REJECT ipt_state usbhid sbp2 iptable_mangle iptable_nat iptable_filter tuner ip6table_mangle tvaudio 3c59x rt2500pci ip_conntrack msp3400 rt2x00core ip_tables mii generic forcedeth bttv video_buf firmware_class i2c_algo_bit ehci_hcd v4l2_common btcx_risc ivtv_tveeprom ieee80211 videodev ieee80211_crypt ohci1394 ieee1394 sata_nv libata scsi_mod snd_intel8x0 snd_ac97_codec snd_ac97_bus shpchp pci_hotplug snd_pcm snd_timer snd soundcore snd_page_alloc i2c_nforce2 i2c_core ohci_hcd usbcore nvidia_agp agpgart ip6table_filter ip6_tables ipv6 parport_pc lp parport nls_utf8 nls_cp850 vfat fat dm_mod reiserfs ide_cd cdrom fan thermal processor amd74xx ide_disk
Nov 4 20:22:54 linux kernel: ide_core
Nov 4 20:22:54 linux kernel: CPU: 0
Nov 4 20:22:54 linux kernel: EIP: 0060:[<f92f23c5>] Tainted: PF U VLI
Nov 4 20:22:54 linux kernel: EFLAGS: 00010246 (2.6.13-15-default)
Nov 4 20:22:54 linux kernel: EIP is at check_dsp+0x45/0xb0 [ueagle_atm]
Nov 4 20:22:54 linux kernel: eax: 00000000 ebx: f88020b5 ecx: c035322c edx: 4ccc634e
Nov 4 20:22:54 linux kernel: esi: f8802005 edi: f8802000 ebp: 00000000 esp: c1907f10
Nov 4 20:22:54 linux kernel: ds: 007b es: 007b ss: 0068
Nov 4 20:22:54 linux kernel: Process events/0 (pid: 3, threadinfo=c1906000 task=dfe35020)
Nov 4 20:22:54 linux kernel: Stack: 00000012 c035322c f7219ac0 f97ef960 f92f4fa9 dfffb640 f92f257f f92f53f0
Nov 4 20:22:54 linux kernel: f97ef960 f77774f8 f8802000 f7210000 f7219ac0 f7210000 f92f27c7 8eefbc00
Nov 4 20:22:54 linux kernel: 003d1103 dfe32000 c1907f6c 10b07600 00000000 f7219af8 00000287 f7219ac0
Nov 4 20:22:54 linux kernel: Call Trace:
Nov 4 20:22:54 linux kernel: [<f92f257f>] request_dsp+0x6f/0x130 [ueagle_atm]
Nov 4 20:22:54 linux kernel: [<f92f27c7>] uea_load_page+0x187/0x1e0 [ueagle_atm]
Nov 4 20:22:54 linux kernel: [<c012a529>] worker_thread+0x169/0x200
Nov 4 20:22:54 linux kernel: [<f92f2640>] uea_load_page+0x0/0x1e0 [ueagle_atm]
Nov 4 20:22:54 linux kernel: [<c01195c7>] __wake_up_common+0x37/0x60
Nov 4 20:22:54 linux kernel: [<c0119580>] default_wake_function+0x0/0x10
Nov 4 20:22:54 linux kernel: [<c012a3c0>] worker_thread+0x0/0x200
Nov 4 20:22:54 linux kernel: [<c012db75>] kthread+0x85/0x90
Nov 4 20:22:54 linux kernel: [<c012daf0>] kthread+0x0/0x90
Nov 4 20:22:54 linux kernel: [<c01012f1>] kernel_thread_helper+0x5/0x14
Nov 4 20:22:54 linux kernel: Code: 04 86 39 c3 72 66 8b 04 24 31 ed 85 c0 7e 6f 8d b4 26 00 00 00 00 8b 06 83 c6 04 85 c0 74 59 8d 14 07 8d 42 01 39 c3 72 43 31 c0 <8a> 02 89 44 24 04 85 c0 7e 43 8d 4a 05 39 cb 72 30 66 8b 42 03
Nov 4 20:22:57 linux kernel: <6>usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 20:23:00 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 20:23:04 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 20:23:08 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 4 20:23:10 linux kernel: usb 1-2.3: [UEAGLE-ATM] uea_intr() failed with -110
Nov 4 20:23:10 linux kernel: usb 1-2.3: USB disconnect, address 9
Nov 4 20:23:11 linux kernel: usb 1-2.3: [ueagle-atm] kthread finish with status -110
objdump -d ueagle-atm.ko returns :
00000380 <check_dsp>:
380: 55 push %ebp
381: 57 push %edi
382: 56 push %esi
383: 8d 70 01 lea 0x1(%eax),%esi
386: 53 push %ebx
387: 8d 1c 02 lea (%edx,%eax,1),%ebx
38a: 89 c7 mov %eax,%edi
38c: 51 push %ecx
38d: 39 f3 cmp %esi,%ebx
38f: 51 push %ecx
390: 72 74 jb 406 <check_dsp+0x86>
392: 31 c0 xor %eax,%eax
394: 8a 07 mov (%edi),%al
396: 89 04 24 mov %eax,(%esp)
399: 8d 04 86 lea (%esi,%eax,4),%eax
39c: 39 c3 cmp %eax,%ebx
39e: 72 66 jb 406 <check_dsp+0x86>
3a0: 8b 04 24 mov (%esp),%eax
3a3: 31 ed xor %ebp,%ebp
3a5: 85 c0 test %eax,%eax
3a7: 7e 6f jle 418 <check_dsp+0x98>
3a9: 8d b4 26 00 00 00 00 lea 0x0(%esi),%esi
3b0: 8b 06 mov (%esi),%eax
3b2: 83 c6 04 add $0x4,%esi
3b5: 85 c0 test %eax,%eax
3b7: 74 59 je 412 <check_dsp+0x92>
3b9: 8d 14 07 lea (%edi,%eax,1),%edx
3bc: 8d 42 01 lea 0x1(%edx),%eax
3bf: 39 c3 cmp %eax,%ebx
3c1: 72 43 jb 406 <check_dsp+0x86>
3c3: 31 c0 xor %eax,%eax
3c5: 8a 02 mov (%edx),%al
3c7: 89 44 24 04 mov %eax,0x4(%esp)
3cb: 85 c0 test %eax,%eax
3cd: 7e 43 jle 412 <check_dsp+0x92>
3cf: 8d 4a 05 lea 0x5(%edx),%ecx
3d2: 39 cb cmp %ecx,%ebx
3d4: 72 30 jb 406 <check_dsp+0x86>
3d6: 66 8b 42 03 mov 0x3(%edx),%ax
3da: 25 ff ff 00 00 and $0xffff,%eax
3df: 8d 04 01 lea (%ecx,%eax,1),%eax
3e2: 39 c3 cmp %eax,%ebx
3e4: 72 20 jb 406 <check_dsp+0x86>
3e6: 31 d2 xor %edx,%edx
3e8: 42 inc %edx
3e9: 3b 54 24 04 cmp 0x4(%esp),%edx
3ed: 74 23 je 412 <check_dsp+0x92>
3ef: 8d 48 04 lea 0x4(%eax),%ecx
3f2: 39 cb cmp %ecx,%ebx
3f4: 72 10 jb 406 <check_dsp+0x86>
3f6: 66 8b 40 02 mov 0x2(%eax),%ax
3fa: 25 ff ff 00 00 and $0xffff,%eax
3ff: 8d 04 01 lea (%ecx,%eax,1),%eax
402: 39 c3 cmp %eax,%ebx
404: 73 e2 jae 3e8 <check_dsp+0x68>
406: b8 01 00 00 00 mov $0x1,%eax
40b: 5a pop %edx
40c: 59 pop %ecx
40d: 5b pop %ebx
40e: 5e pop %esi
40f: 5f pop %edi
410: 5d pop %ebp
411: c3 ret
412: 45 inc %ebp
413: 39 2c 24 cmp %ebp,(%esp)
416: 75 98 jne 3b0 <check_dsp+0x30>
418: 31 c0 xor %eax,%eax
41a: 5a pop %edx
41b: 59 pop %ecx
41c: 5b pop %ebx
41d: 5e pop %esi
41e: 5f pop %edi
41f: 5d pop %ebp
420: c3 ret
421: eb 0d jmp 430 <uea_idma_write>
423: 90 nop
424: 90 nop
425: 90 nop
426: 90 nop
427: 90 nop
428: 90 nop
429: 90 nop
42a: 90 nop
42b: 90 nop
42c: 90 nop
42d: 90 nop
42e: 90 nop
42f: 90 nop
(complete file here)
Using SVN Revision 163
The
DSPep.bin file I was using was wrong. The new SVN version now handle better such mistakes :
"firmware ueagle-atm/DSPep.bin is corrupted"
Nov 5 12:39:39 linux kernel: usb 1-2.3: new full speed USB device using ohci_hcd and address 11
Nov 5 12:39:40 linux kernel: atm: module not supported by Novell, setting U taint flag.
Nov 5 12:39:40 linux kernel: NET: Registered protocol family 8
Nov 5 12:39:40 linux kernel: NET: Registered protocol family 20
Nov 5 12:39:40 linux kernel: usbatm: module not supported by Novell, setting U taint flag.
Nov 5 12:39:40 linux kernel: ueagle_atm: module not supported by Novell, setting U taint flag.
Nov 5 12:39:40 linux kernel: [ueagle-atm] driver ueagle-svn $Id: ueagle.c 163 2005-11-05 08:47:01Z swg $ loaded
Nov 5 12:39:40 linux kernel: usb 1-2.3: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010)
Nov 5 12:39:40 linux kernel: usb 1-2.3: reset full speed USB device using ohci_hcd and address 11
Nov 5 12:39:40 linux kernel: usb 1-2.3: [ueagle-atm] pre-firmware device, uploading firmware
Nov 5 12:39:40 linux kernel: usb 1-2.3: [ueagle-atm] loading firmware ueagle-atm/eagleI.fw
Nov 5 12:39:40 linux kernel: usbcore: registered new driver ueagle-atm
Nov 5 12:39:42 linux kernel: usb 1-2.3: [ueagle-atm] firmware uploaded
Nov 5 12:39:42 linux kernel: usb 1-2.3: USB disconnect, address 11
Nov 5 12:39:44 linux kernel: usb 1-2.3: new full speed USB device using ohci_hcd and address 12
Nov 5 12:39:44 linux kernel: usb 1-2.3: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F)
Nov 5 12:39:44 linux kernel: usb 1-2.3: reset full speed USB device using ohci_hcd and address 12
Nov 5 12:39:44 linux kernel: usb 1-2.3: [ueagle-atm] using iso mode
Nov 5 12:39:44 linux kernel: usb 1-2.3: [ueagle-atm] created proc entry at: /proc/driver/ueagle-atm/001-012
Nov 5 12:39:44 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 5 12:39:44 linux kernel: ATM dev 0: usbatm_submit_urb: urb 0xdbea9a40 submission failed (-28)!
Nov 5 12:39:45 linux kernel: usb 1-2.3: [UEAGLE-ATM] firmware ueagle-atm/DSPep.bin is corrupted
Nov 5 12:39:48 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 5 12:39:49 linux kernel: usb 1-2.3: [UEAGLE-ATM] firmware ueagle-atm/DSPep.bin is corrupted
Nov 5 12:39:51 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 5 12:39:53 linux kernel: usb 1-2.3: [UEAGLE-ATM] firmware ueagle-atm/DSPep.bin is corrupted
Nov 5 12:39:55 linux kernel: usb 1-2.3: [ueagle-atm] (re)booting started
Nov 5 12:39:56 linux kernel: usb 1-2.3: [UEAGLE-ATM] firmware ueagle-atm/DSPep.bin is corrupted
Nov 5 12:39:57 linux kernel: usb 1-2.3: [UEAGLE-ATM] uea_intr() failed with -110
Nov 5 12:39:57 linux kernel: usb 1-2.3: USB disconnect, address 12
Nov 5 12:39:59 linux kernel: usb 1-2.3: [ueagle-atm] kthread finish with status -110
Nov 5 12:39:59 linux kernel: usb 1-2.3: [UEAGLE-ATM] usb_control_msg error -19
Nov 5 12:39:59 linux kernel: usb 1-2.3: [ueagle-atm] ADSL device removed
Using binary files from ueagle-data-1.0.tar.gz, the modem synchronize
linux:~ # cat /proc/driver/ueagle-atm/*
ueagle-atm status display
-------------------------------------------------------------
Driver version: ueagle-svn $Id: ueagle.c 163 2005-11-05 08:47:01Z swg $ Chipset: Eagle I
Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x410b(pots)
USB Bus : 001 USB Device : 014 Dbg : 0
VID-CPE 28 VID-ITU 445600000000414e
Tx Rate 320 Kps Rx Rate 6304 Kps
Tx Atten 22 dB Rx Atten 29 dB
Tx Margin 27 dB Rx Margin 8 dB
Tx Blocks 138690 Rx Blocks 138621
Tx FEC 69 Rx FEC 414
Tx Error 0 Rx Error 1242
Delin GOOD Flags 0000000008
Modem is operational
